SABIC

SABIC introduces LNP™ ELCRIN™ iQ upcycled compounds to extend useful life of PET bottles and help reduce plastic waste

BERGEN OP ZOOM, THE NETHERLANDS, May 16, 2019 - SABIC today introduced its LNP™ ELCRIN™ iQ portfolio of polybutylene terephthalate (PBT) compounded resins derived from recycled polyethylene terephthalate (rPET) to support the circular economy and help reduce plastic waste. By chemically upcycling consumer-discarded PET (primarily single-use water bottles) into higher-value PBT materials with enhanced properties and suitability for more-durable applications, the company is encouraging the use of recycled resins. These products also offer a smaller cradle-to-gate environmental footprint than virgin PBT resin, as measured by Cumulative Energy Demand (CED) and Global Warming Potential (GWP).

Better Properties, Longer Life than PET

SABIC’s LNP™ ELCRIN™ iQ compounds and blends are based on upcycled iQ PBT resins, a proprietary SABIC technology. This technology overcomes some of the limitations of mechanical recycling by using chemical processes to depolymerize PET bottles and other PET waste into their precursor chemicals, purify them and then use them to create new PBT resin. The technology can deliver performance and processing benefits such as good chemical resistance, colorability, high flow for faster throughput and flame retardance (FR).

LNP™ ELCRIN™ iQ resin is a drop-in solution for virgin PBT and other conventional PBT materials, making it easier for manufacturers to make their products more sustainable. By displacing virgin raw material used to manufacture PBT, LNP™ ELCRIN™ iQ resin has been shown through peer-reviewed life cycle assessment[1] to reduce the energy and carbon footprint of the material by up to 61 percent and 49 percent, respectively. Further, each kilogram of LNP™ ELCRIN™ iQ resin uses up to 67 post-consumer PET water bottles (0.5 liter).

The ELCRIN™ iQ portfolio offers customers multiple options, including glass- and mineral-reinforced grades and non-halogenated FR and UV-resistant formulations. Some of the LNP™ ELCRIN™ iQ grades even have the potential to achieve compliance with U.S. Food & Drug Association (FDA) food contact regulations.

Potential applications for these new polymers include durable internal and aesthetic components for consumer electronics, automotive connectors, and housings for medical devices. Such applications can extend the useful life of the original, single-use PET resin, which helps keep the material out of the waste stream for a longer period.

“Consumer-discarded PET bottles lose value and performance properties through conventional mechanical recycling,” said Joshua Chiaw, Global Business Director, LNP, SABIC. “This downcycling process limits the types of applications for which rPET can be used. In contrast, SABIC’s chemical upcycling process helps improve the performance and quality of the final resin product. As a result, these PBT materials are potentially more desirable for durable applications. Overall, LNP™ ELCRIN™ iQ materials can help reduce reliance on virgin resin and address industry and consumer demand for greater use of more-sustainable materials.”

“The development of LNP™ ELCRIN™ iQ materials is a major step forward for SABIC and illustrates our unyielding commitment to our customers, the global plastics industry, and the Alliance to End Plastic Waste, which we joined as a founding member,” said Frank Kuijpers, General Manager, Corporate Sustainability, SABIC. “Our innovative process for chemical upcycling of single-use PET directly supports the AEPW’s goal of developing new technologies that help minimize waste, make recovering and recycling plastics easier, and create value from all post-use plastics.”

SABIC LNP™ ELCRIN™ iQ grades are available worldwide.

[1] The original peer-reviewed life cycle assessment study was completed by SABIC in 2011. The results are being reviewed and updated based on current models, with expected completion and peer-review in 2019.

Reader enquiries

SABIC
Europaboulevard 1
6135 LD Sittard
Netherlands
+86 21 2037 8436
yvonne.yan@​sabic.com
www.sabic.com

Notes for editors

  • SABIC and brands marked with ™ are trademarks of SABIC or its subsidiaries or affiliates.
  • SABIC should be written in every instance in all uppercase.

ABOUT SABIC

SABIC is a global leader in diversified chemicals headquartered in Riyadh, Saudi Arabia. We manufacture on a global scale in the Americas, Europe, Middle East and Asia Pacific, making distinctly different kinds of products: chemicals, commodity and high performance plastics, agri-nutrients and metals.

We support our customers by identifying and developing opportunities in key end markets such as construction, medical devices, packaging, agri-nutrients, electrical and electronics, transportation and clean energy.

SABIC recorded a net profit of US$ 5.7 billion in 2018. Sales revenues for 2018 totaled US$ 45 billion while total assets stood at US$ 85 billion. Production in 2018 was 75.3 million metric tons.

SABIC has more than 33,000 employees worldwide and operates in around 50 countries. Fostering innovation and a spirit of ingenuity, we have 11,738 global patent filings, and have significant research resources with innovation hubs in five key geographies – USA, Europe, Middle East, South Asia and North Asia.

Related images

SABIC introduces LNP™ ELCRIN™ iQ upcycled compounds to extend useful life of PET bottles and help reduce plastic waste.

 

Editorial enquiries

Yvonne Yan
SABIC

+86 21 2037 8436
yvonne.yan@​sabic.com

Kevin Noels
Marketing Solutions NV

+32 3 31 30 311
knoels@​marketing-solutions.com

 

 

Share

 

More news from