Pallmann

Re-using PVC left-overs the smart way

Pallmann’s state of the art recycling solution for roofing and tubes giant Protan

Zweibrücken, Germany (8 July 2015) – A €1.2 million investment in an upgraded recycling facility to handle PVC production left-overs paid for itself in 18 months at Protan Group, the Norway-based manufacturer of roofing foils and ventilation tubes for tunnels and mines. The investment, in equipment from German size-reduction technology specialist Pallmann, came through cost savings and increased capacity.

Protan is now running a state-of-the-art, tailor-made three-in-one recycling installation for grinding, agglomerating and pulverising. ‘It would have been stupid not to purchase new technology,’ says Tom Lillemoen, Protan’s technical manager.

The company, which has an annual turnover of one billion Norwegian Crowns (€110 million), is one of the world’s largest manufacturers and suppliers of innovative roofs, membranes, technical textiles and ventilation systems. Every year, hundreds of kilometres of its ventilation pipes are installed in mines and tunnels around the globe - mainly in Europe, Africa and South America.

Protan wins most of its work - some 65% - from above-ground applications, such as the fabrication of foils for roofs on office and industrial buildings located in some of the most challenging climates in the world. Over the past 40 years, Protan’s coverings have been installed on roofs in conditions as diverse as the African desert and the tundra on the Spitzbergen archipelago in the Arctic Ocean.

High value materials

It is in its roofing products that Protan uses most of its recycled materials. On average, it incorporates 6% recyclate in its production process, most of which is sourced in-house. Owing to their complexity, it is difficult to dispose of or use these materials in other applications; however, the materials are of high value, making internal reuse worthwhile.

Protan started recycling two decades ago and Pallmann’s engineers have been involved from the earliest pioneering stage. The size-reduction technology major installed a reconditioned PFV agglomerator in Protan’s plant in 2000.

Over the years, this solution has become outdated, according to Lillemoen. ‘It became increasingly unsuitable for the products and recipes we were working with, and its capacity was no longer sufficient,’ he explains. ‘On top of that, new products required new particle sizes, which could not be produced with the old technology.

Tailor-made solution

Again, Pallmann extended a helping hand. ‘Almost 20 years of experience at Protan and Pallmann in reusing production waste allowed us to engage quickly in deep technical discussions to find the best adapted solutions,’ says Michel Marchal, project & area sales manager for Pallmann.

Pallmann ran an extensive test programme in Germany: existing material mixtures and new recipes and material compositions were all tried out before implementation. Grinding, agglomeration and pulverising tests were done at Pallmann’s large test centre at Zweibrücken, while the end products were tested on Protan’s production lines in Norway.

Three-in-one installation

In the new facility, grinding is undertaken by Pallmann’s knife mill-type PS 4-7,5; agglomeration is carried out in a Plast agglomerator PFV 250; and a PolyGrinder PM 300 unit takes care of the pulverising. The machines are connected via conveying units, silos and collection units. Pallmann supplied and commissioned the entire package of components.

Reader enquiries

PALLMANN Group
Wolfslochstraße 51
66482 Zweibrücken
Germany
+49 6332 802-103
rolf.gren@​pallmann.eu
www.pallmann.eu

Notes for editors


The PALLMANN Group

Founded in 1903 as an engineering works, Pallmann is a medium-sized family-owned enterprise that has a history covering seven generations of millers and millwrights. Now a global company, the PALLMANN Group has specialized in size reduction and processing technology in various sectors. With over 100.000 installations worldwide and more than 1000 machine types in what is the world's largest range of size reduction equipment for all materials ranging from soft to medium-hard, brittle to tough, as well as fibrous products.

Pallmann group has one of the world’s largest test facility where customer can send material to ensure the correct equipment is used for their needs.

Worldwide, the group employs around 600 experienced and highly qualified staff. Its own engineering works, subsidiaries, contract grinding and sales offices in Europe, North and South America, Asia and China ensure the best service, expert advice and support in planning, installation, commissioning of plant and equipment, and supply of spare parts.

To find out more about The PALLMANN Group please visit www.pallmann.eu.

About Protan

The company’s main factory and headquarters in Drammen, a half-hour drive south west of Norway’s capital Oslo. Beyond Norway, Protan also operates a production facility at Poznań in Poland.

To find out more about Protan please visit www.protan.com.

Related images

 

Editorial enquiries

Rolf Gren
PALLMANN Group

+49 6332 802-103
Rolf.Gren@​pallmann.eu

Inka Finne
EMG

+31 164 317 019
ifinne@​emg-pr.com

 

Also available in

 

Share

 

More news from